China Standard CE Certificated Factory Front-End Telescopic Hydraulic Cylinder for Trailer and Tipper Hoist cross tube hydraulic cylinders

Product Description

Product Advantage:
1.  Safer 
Junfu hydraulic cylinder adopts excellent structural design and new material application, which can withstand the harshest working conditions and continue to work stably without disconnection, ensuring the safety of drivers and vehicles, and creating the most valuable safety for users.
2. faster unloading
Junfu series oil cylinder adopts excellent structural design to improve the unloading speed of the oil cylinder!
3.higher lift frequency
junfu series oil cylinders are suitable for all-weather short barge and high-frequency operations, with stable performance, extremely low failure rate, increasing the number of transfers and reducing downtime!
4. Greater adaptability to the environment
junfu series oil cylinder adopts innovative sealing technology and new material application, which can adapt to the temperature range of -40~110ºC, and can achieve excellent performance in high temperature and low temperature environment operation!
5. lighter
Compared with other products of the same series, Junfu series cylinders reduce the dead weight by 15%~20%, and increase the lifting force by 10%~15%!
6. Greater lifting force
Compared with other products of the same series, the lifting force of junfu series cylinders is increased by 10%~15%. More lift, more load, more profit! Lighter dead weight, greater lifting force, more lightness!
 

Technical specs

Type

cylinder dia

(mm)

rated pressure

(MPA)

installation distance

(mm)

stroke

(mm)

total length (mm)

weight

(kg)

FC129-3-3220

129

22

343

3220

1387

191

FC129-4-3480

129

22

343

3480

1218

178

FC137-3-3830

137

22

343

3830

1640

244

FC137-3-4280

137

22

343

4280

1860

268

FC137-4-4280

137

22

343

4280

1455

236

FC157-4-3830

157

22

343

3830

1350

260

FC157-4-4650

157

22

343

4650

1555

280

FC157-4-5000

157

22

343

5000

1650

300

FC157-5-3830

157

22

343

3830

1170

230

FC157-5-4650

157

22

343

4650

1275

245

FC179-4-4280

179

22

343

4280

1480

235

FC179-4-5390

179

22

343

5390

1755

360

FC179-4-6100

179

22

343

6100

1940

390

FC179-5-3830

179

22

343

3830

1170

265

FC179-5-4650

179

22

343

4650

1282

283

FC179-5-5000

179

22

343

5000

1405

305

FC179-5-5800

179

22

343

5800

1570

350

FC179-5-6300

179

22

343

6300

1655

360

FC179-5-7300

179

22

343

7300

1850

400

FC191-5-5780

191

22

343

5780

1530

273

FC191-5-6500

191

22

343

6500

1670

410

FC191-5-6800

191

22

343

6800

1735

738

FC191-5-7300

191

22

343

7300

1835

458

FC191-54-6100

191

22

343

6100

1955

273

FC196-4-6180

196

22

343

6180

1940

479

FC196-5-6350

196

22

343

6350

1710

450

FC202-4-6100

202

22

343

6100

1935

479

FC202-5-6800

202

22

343

6800

1765

465

FC202-6-7000

202

22

343

7000

1570

440

FC214-5-7300

214

22

343

7300

1900

530

FC214-7-7600

214

22

343

7600

1455

450

FC240-5-9030

240

22

343

9030

2270

820

Pipe dia:

202/179/157/137/118/99/80

240/214/191/169/149/129/110/90/70

 

Enterprise Certificate

OUR PARTNER

FAQ:

Q1:  How about the quality of cylinder?
      Our cylinders can replace HYVA cylinder well, with same technical details and mounting sizes

Q2: What’s your cylinder’s advantages ?
      The cylinders are manufactured by advanced equipments and made under strictly quality control processing.
      The steel is tempered and all raw materials are good quality from world famous companies.
      Competitive price!

Q3: When your company be established ?
      Our company be established in 2002, professional manufacturer of hydraulic cylinders more than 20 years.
      We had passed IATF 16949:2016 Quality control system, ISO9001, CE.

Q4: How about the delivery time ?
       depends the quantity and normally 1 month is ok

Q5: How about the cylinder’s quality gurantee ?
      One year.
 

Certification: CE, ISO9001, IATF 16949:2016, SGS
Pressure: High Pressure
Work Temperature: Normal Temperature
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

hydraulic cylinders

Hydraulic Cylinders and Their Components

Typically, a hydraulic cylinder is used in manufacturing machinery, construction equipment, civil engineering, and elevators. A hydraulic cylinder is also known as a mechanical actuator. A hydraulic cylinder is a type of mechanical actuator that is used to provide unidirectional force.

Piston rod

Choosing the correct rod for hydraulic cylinders can improve the performance and dependability of the machine. While the diameter is always important, the length is also crucial. If the length of the rod is too short, it will crush or fail. On the other hand, if the rod is too long, it will become twisted or misaligned.
The rod seal is the most important seal in a hydraulic cylinder. It protects the cylinder from fluid leaks and system pollutants. It also handles gradual changes in system pressure.
There are many types of seals for hydraulic cylinders. Some of them are special and designed to work under intense pressure. These seals also have backup rings.
A piston rod can be either hollow or solid. It is usually made of steel or stainless steel. It is often coated with hard chrome plating. A polished surface is also an option.
Choosing the correct seal is a crucial step in ensuring the longevity of your piston rod. Rod seals are subject to the most harsh conditions. They need to be made from materials that are slow to wear and will not contaminate the cylinder.
The correct rod seal is also important in preventing fluid leaks. They also protect the cylinder from pressure extremes in the system. If the seal fails, the cylinder will be damaged. The seal is also important because it prevents system pollutants from damaging the rod.
A hydraulic cylinder can be single acting or double acting. Single acting cylinders have one pressurized chamber while double acting cylinders have two. Typically, double acting cylinders have a piston that is extended under hydraulic pressure and retracts under hydraulic pressure.

Piston seals

Choosing the correct hydraulic cylinder piston seal is important to the operation of a hydraulic cylinder. There are various types of seals that can be used to help ensure proper operation of a cylinder. They range from single-action to double-acting seals. The seal’s material and its profile affect its performance.
The materials used to make piston seals range from rubber to thermoplastic polyurethane. The material’s elasticity and strength are also important. Typically, plastic seals have more focus on adding strength to the cylinder than on flexibility.
Rubber seals are used when a higher degree of flexibility is required. They are also used when a higher degree of compressibility is required. Some rubber seals are designed to withstand higher temperatures.
Piston seals are made from a variety of materials, including Viton, nitrile rubber, and polytetrafluoroethylene (PTFE). PTFE piston seals have less friction, which is a good thing. A PTFE seal is also able to handle higher temperatures.
In order to properly seal a cylinder, the seal must maintain contact with the cylinder bore. This ensures that fluid does not flow past the piston. The seal’s profile must also leave a small amount of oil film when it passes along the cylinder bore.
Thermoplastic elastomers are designed to offer superior elasticity. They also stand up to abrasion and high use. They also exhibit unmatched performance at extreme temperatures.
A piston seal can be designed to meet various requirements, including the highest pressures that can be expected. Some manufacturers offer custom sealing solutions. These solutions include testing, according to the customer’s specifications. They can also include failure analysis and system investigations.
Thermoplastic elastomers are also designed to be resistant to tearing. In addition, they are able to maintain a constant pressure for a longer period of time than other materials.hydraulic cylinders

Mounting attachments

Using mounting attachments for hydraulic cylinders can reduce wear and tear on seals and bearings, and provide stability to the cylinder. There are three main groups of mounts: flange, lug, and clevis. Each style is designed for a different purpose. Choose the mount that is best for your hydraulic cylinder.
Flange mounts are a good choice for straight-line force-transfer applications. These mounts come in rectangular or square shapes and can be attached to the head or cap of a cylinder. They are very strong and are not prone to misalignment. They are also available in rod-end styles, which are recommended for tension applications.
Side lug mounts are used for small or light-duty hydraulic cylinders that require a straight-line force transfer. These mounts have lugs on the sides of the mount that are threaded to tie rods. These mounts are primarily used in confined spaces. The lugs can also be pinned on both sides of the mount to prevent movement of the cylinder. The lugs are also strong and can be used in high-pressure environments.
Clevis mounts are also used for arcing loads. They are primarily used on shorter stroke hydraulic cylinders. They can be mounted vertically or horizontally. They are usually used with a knuckle at the rod end of a cylinder. These mounts provide a single pivot point for mounting the cylinder.
Cylinder rod end attachments should be made from spherical bearings to minimize stress on the gland and piston rod. Ideally, they should be positioned as close as possible to the shoulder faces of the trunnion. They should also be threaded to tie rods for a secure connection.
The best mounting style for a hydraulic cylinder is an intermediate fixed-trunnion mount. This type of mount is a good choice for short stroke applications.

Common hydraulic cylinder components

Whether you are looking for a new hydraulic cylinder, or you are considering upgrading the hydraulic cylinders in your current machine, you need to understand the different components of a hydraulic cylinder. Cylinders are used in a variety of applications, including construction, mining, aircraft development, metal sheet shearing, and material handling.
A hydraulic cylinder is composed of two main components. These are the piston and the piston rod. The piston rod protrudes from the cylinder barrel and is attached to the piston inside the cylinder.
A hydraulic cylinder also has seals. These are used to prevent contaminants from entering the cylinder. They are made of many different materials, depending on the application. If the hydraulic cylinder will be operating at a high temperature, it may need a seal made of Viton. In contrast, a hydraulic cylinder operating at freezing temperatures may need a polyurethane seal.
Hydraulic cylinders are also designed to withstand a large amount of force, which means that they need to be able to withstand the pressure of the system. The pressure in the system must never exceed the rated design pressure of the cylinder.
Another important component of a hydraulic cylinder is the cylinder head. It is fitted with a rod gland seal, which encloses the pressure from the other end of the cylinder barrel. A hydraulic cylinder’s head can also be fitted with a check valve, which closes when the stem is clear.
A hydraulic cylinder’s head is also fitted with a rod bearing, which supports the weight of the piston rod. The rod bearing guides the piston rod through the rod gland, and prevents hydraulic oil leakage.
A hydraulic cylinder’s rod can be made from stainless steel or carbon steel. The rod is usually coated with hard chrome plating. The rod can also be made from corrosion-resistant materials, including Inconel.hydraulic cylinders

Common causes of hydraulic cylinder drift

Having a hydraulic cylinder that drifts is not only dangerous, but it can lead to a lot of repair work and costly replacements. Luckily, you can diagnose and fix this problem by performing a few simple tests.
The first step is to ensure that the cylinder is in good working order. It should be checked for general wear, corrosion, and speed. Also, it should be checked for leaks. If there are any leaks, you should fix them right away.
Another way to determine if a cylinder is drifting is to use a pressure gauge. The gauge should be used under controlled conditions to determine if the cylinder is drifting. If the cylinder moves, the problem is likely a leak. You should also check the rod seal.
When the rod seal leaks, it allows fluid to leak outside of the cylinder system. If it does not leak, it should stick to the rod when the rod stops moving. This will prevent a cylinder from drifting and maintain pressure.
The most common cause of hydraulic cylinder drift is a leak. A leak can occur in a number of ways, including through the piston seal or a leak in the holding or pressure release valves. If the leak is in the piston seal, it can lead to a hydraulic cylinder that drifts.
Another common cause of hydraulic cylinder drift is fluid contamination. When foreign particles combine with the fluid, the density can change and oil can seep past seals.
Hydraulic cylinders can experience other issues as well. If the cylinder has an oversized piston diameter, it can cause cylinder drift. A load control valve can also be a problem.
China Standard CE Certificated Factory Front-End Telescopic Hydraulic Cylinder for Trailer and Tipper Hoist   cross tube hydraulic cylindersChina Standard CE Certificated Factory Front-End Telescopic Hydraulic Cylinder for Trailer and Tipper Hoist   cross tube hydraulic cylinders
editor by CX 2023-11-10

Recent Posts